MTU C23R Instructions d'exploitation Page 112
- Page / 163
- Table des matières
- DEPANNAGE
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
7.13.3 Engine oil – Change
Preconditions
☑Engine shut down and starting disabled.
☑Engine is at operating temperature.
☑MTU Fluids and Lubricants Specifications (A001061/..) are available.
Special tools, Material, Spare parts
Designation / Use Part No. Qty.
Torque wrench, 40-200Nm
F30027337 1
Ratchet adapter
F30027341 1
Engine oil
Sealing ring
(→ Spare Parts Catalog)
WARNING
Hot oil.
Oil can contain combustion residues which are harmful to health.
Risk of injury and poisoning!
• Wear protective clothing, gloves, and goggles / safety mask.
• Avoid contact with skin.
• Do not inhale oil vapor.
Procedure without pump: Draining oil at drain plug(s) on oil pan
1. Provide a suitable container in which to collect the engine oil.
2. Remove drain plug(s) and drain engine oil.
3. Install drain plug(s) with new sealing ring.
Procedure with pump: Extracting engine oil
1. Provide a suitable container in which to collect the engine oil.
2. Extract all oil from oil pan using the pump.
Draining residual oil from equip-
ment carrier (only with unsched-
uled engine oil change)
1. Provide a suitable container in which to col-
lect the engine oil.
2. Remove drain plug (1) and drain oil (ap-
prox. 7 liters) from oil heat exchanger and
oil filter.
3. Remove drain screws (2) and (3) and drain
engine oil:
• (2) approx. 12 liters
• (3) approx. 5 liters
4. Install drain screws(s) with new sealing
ring.
112 | Task Description | M015695/03E 2013-03
TIM-ID: 0000006152 - 008
- Operating Instructions 1
- Table of Contents 3
- 1 Safety 5
- 1.3 Transport 7
- TIM-ID: 0000035999 - 002 9
- TIM-ID: 0000040647 - 002 10
- Operation 12
- Welding work 14
- Working with batteries 14
- Working with laser equipment 15
- Fire prevention 16
- Used oil 16
- Safety notices 18
- 2 General Information 19
- 2.2 Engine layout 20
- TIM-ID: 0000012925 - 002 21
- 3 Technical Data 25
- CONSUMPTION 26
- COMBUSTION AIR / EXHAUST GAS 27
- COOLANT SYSTEM (HT circuit) 27
- COOLANT SYSTEM (LT circuit) 27
- LUBE OIL SYSTEM 28
- FUEL SYSTEM 29
- GENERAL OPERATING DATA 29
- CAPACITIES 30
- ACOUSTICS 30
- TIM-ID: 0000002875 - 002 31
- TIM-ID: 0000002924 - 002 38
- REFERENCE CONDITIONS 43
- 3.5 Firing order 47
- 3.6 Main engine dimensions 48
- 4 Operation 49
- Preparation 51
- Starting the engine 51
- Stopping the engine 52
- 4.6 Plant cleaning 54
- 5 Maintenance 55
- 6 Troubleshooting 56
- TIM-ID: 0000002541 - 002 57
- TIM-ID: 0000033662 - 001 59
- 7 Task Description 78
- TIM-ID: 0000002521 - 005 79
- TIM-ID: 0000000918 - 004 80
- TIM-ID: 0000003285 - 003 83
- 7.3 Crankcase Breather 85
- Checking diaphragm 86
- 7.4 Running Gear 87
- Installing grounding device 88
- Replace carbon brush 89
- Diagram for 8V engines (two 92
- Diagram for 12V engines (two 92
- Diagram for 16V engines (two 93
- Diagram for 20V engines (two 93
- Adjusting valve clearance 94
- Removing cylinder head cover 95
- 7.6 Injection Pump / HP Pump 96
- 7.7.1 Injector – Replacement 97
- Removing injector 98
- TIM-ID: 0000000925 - 008 101
- 7.8 Fuel System 103
- 7.9 Fuel Filter 104
- 7.9.2 Draining fuel prefilter 105
- Final steps 106
- Preconditions 106
- Preparatory steps 106
- Fuel prefilter – Draining 106
- 7.10 Charge-Air Cooling 107
- 7.11 Air Intake 108
- 7.12 Starting Equipment 109
- 7.13.3 Engine oil – Change 112
- Filling with new engine oil 113
- 7.14 Oil Filtration / Cooling 115
- TIM-ID: 0000029294 - 007 116
- Removing strainer 118
- Checking strainer 119
- Cleaning strainer 119
- Installing strainer 119
- TIM-ID: 0000000934 - 010 121
- Engine coolant – Change 123
- Draining engine coolant 124
- Concluding operations 125
- Filling with coolant using a 127
- TIM-ID: 0000006798 - 005 129
- 7.16 Low-Temperature Circuit 132
- Charge-air coolant – Change 133
- Draining charge-air coolant 134
- TIM-ID: 0000007012 - 006 136
- Charge-air coolant pump – 138
- Checking pressure relief port 138
- 7.17 Belt Drive 139
- Removing alternator 140
- Tensioning drive belt 141
- Adjusting belt tension 143
- 4. Install protective cover 145
- 7.19 Fan Drive 146
- Adjusting drive belt tension 147
- Replacing drive belt 148
- 7.20.1 Engine wiring – Check 149
- 8 Appendix A 152
- TIM-ID: 0000009959 - 008 153
- 9 Appendix B 155
- DCL-ID: 0000013811 - 005 156
- 9.2 Index 162
Produits connexes et manuels pour Moteur MTU C23R
Moteur MTU 12 V 2000 P12 Manuel d'utilisateur
(190 pages)
(190 pages)
Moteur MTU 12 V 4000 C10R Manuel d'utilisateur
(124 pages)
(124 pages)
Moteur MTU 12 V 4000 C10R Manuel de service
(104 pages)
Moteur MTU 16 V 2000 P12 Spécifications
(216 pages)
(216 pages)
Moteur MTU Gas engine8 V 4000 L62 Spécifications
(104 pages)
(104 pages)
Moteur MTU 12 V 4000 C21 Manuel de service
(214 pages)
(214 pages)
Moteur MTU C23 Manuel d'utilisateur
(12 pages)
(12 pages)
Moteur MTU C23R Manuel d'utilisateur
(7 pages)
(7 pages)
Moteur MTU 12 V 4000 C10R Spécifications
(53 pages)
(53 pages)
Moteur MTU C13R Spécifications
(25 pages)
(25 pages)
Moteur MTU 12 V 4000 C10R Manuel d'utilisateur
(124 pages)
(124 pages)
© 2020, manymanuals.fr. Tous droits réservés | 0.064 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels