MTU C23R Instructions d'exploitation télécharger pdf (Page 95)

7.5.3 Cylinder head cover – Removal and installation

Preconditions

☑Engine is stopped and starting disabled.

Special tools, Material, Spare parts

Designation / Use Part No. Qty.

Grease (Kluthe Hakuform 30-10/Emulgier)

X00029933 1

O-ring

(→ Spare Parts Catalog)

Removing cylinder head cover

1. Clean very dirty cylinder head covers (1)

prior to removal.

2. Remove screws (3, 4) with washers (2, 5).

3. Take off cylinder head cover (1) with O-

ring (6) from cylinder head (7).

Installing cylinder head cover

1. Clean mounting surface.

2. Check O-ring (6) for damage, replace if necessary.

3. Coat O-ring (6) with grease.

4. Position O-ring (6) in groove of cylinder head cover (1).

5. Fit cylinder head cover (1) on cylinder head (7).

6. Install cylinder head cover (1) with screws (3, 4) and washers (2, 5).

M015695/03E 2013-03 | Task Description | 95

TIM-ID: 0000012309 - 010

1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 162 163

Pas de commentaire

MTU C23R Instructions d'exploitation Page 95